Advertisement
RINSE_
- This symbol flashes to indicate the rinse
,,,,,,
circulation has started.
44_,k_b
To cancel any cycle before it's finished, touch the
"""
Cancel Pad. The indicator on the Cancel Pad will
light and a tone will sound. The dishwasher will
DRY - The fan symbol will light during the dry
drain and shut off.
I1_:_111
period and the fan blades will flash only
when the fan is on. The heat symbols
will also light when Heat Dry is selected.
To prevent children from accidentally starting the
Special Indicator
Words
dishwasher or changing the cycle and options,
CLEAN - appears at the end of a complete wash
touch the Lock Pad 3 times within 3 seconds,
cycle.
It will remain lit until the door has been
LOCKED will appear in the Display.
To cancel,
opened for 60 seconds.
again touch theLock Pad 3 times within 3 seconds.
DELAY - appears when the Delay Pad is touched.
LNOTE: This does not lock the door.
I The time (in hours or minutes) is also displayed.
DELICATE WASH - appears when this option has
been chosen with any wash cycle.
After loading, close the door, press the door until
the latch clicks.
HEATED DRY - appears if Heat Dry is selected.
Note:
If your water heater is located a long
HEATING- appears when the water temperature
distance from the kitchen, run the water from the
islowandtheheatingelementisonduringwashing
hot water tap to clear the line of cold water before
or rinsing portions of the cycle. It is NOT lit during
starting,
the drying portion of the cycle.
Turn the dishwasher on by firmly touching the pad
LOCKED - appears when the Child Lock has been
corresponding
with the chosen cycle (Sensor
activated.
Start Pad, Sani Scrub Pad, Quick Wash Pad or
Rinse & Hold Pad).
The indicator light for the
LOWRINSEAID-appearsattheendofthecycle
selected cycle will glow.
as a reminder to add more rinseaid to the dispenser
in the door. It shuts off after the door is opened.
PF - appears when there has been a power failure.
Through words, symbols and numbersthe Display
Any option selected before the power failure will
window
indicates
what
is happening
in the
need to be reselected.
dishwasher.
RINSED - appears after a Rinse & Hold cycle.
Cycle Progression
The dishwasher will indicate the portion of the
Service Indicator Words
cycle it is currently in. Estimated time remaining
If BLOCKED DRAIN, BLOCKED WASH ARM or
in the cycle (in minutes) also appears in the
WASH ARM appears in the Display, see pages
Display.
14-15.
If any other code appears, contact your
servicer or Jenn-Air Customer
Assistance,
c/o
WASH " This symbol flashes to indicate the
Maytag Customer Service (1-800-688-1100).
i_nlll_T
wash circulation has started.
Soiled
IIII II|t
itemscan be added while in this portion
of the cycle.
lO
Advertisement
