PEUGEOT 208 Handbook page 44

Access
Protection - perimeter
monitoring only
Deactivate the interior volumetric monitoring
(and tilt monitoring, if fitted to your vehicle)
to avoid unwanted triggering of the alarm in
certain cases such as:
- the presence of a pet in the vehicle,
- a window partially open,
- washing your vehicle.
Deactivation of the volumetric monitoring
Tilt monitoring is deactivated, if fitted to your
vehicle.
F Switch off the ignition.
F Within ten seconds, press the
button until the indicator lamp is
on continuously.
F Get out of the vehicle.
F Press the locking button on the
remote control immediately.
The exterior perimeter monitoring alone is
activated: the indicator lamp in the button
flashes once per second.
To be effective, the deactivation must
be carried out each time the ignition is
switched off.
42
Locking the vehicle without
activating the alarm
F Lock or deadlock the vehicle using
the key in the driver's door lock.
Triggering of the alarm
When the alarm is triggered the siren sounds and
the direction indicators flash for thirty seconds.
The monitoring functions remain active until
the alarm has been triggered eleven times in
succession.
When the vehicle is unlocked using
the remote control, rapid flashing
of the indicator lamp in the button
informs you that the alarm was
triggered during your absence.
When the ignition is switched on, this
flashing stops immediately.
Advice
Remote control fault
To deactivate the monitoring functions:
F Unlock the vehicle using the key in the
driver's door lock.
F Open the door; the alarm is triggered.
F Switch on the ignition; the alarm stops. The
indicator lamp in the button goes off.
Alarm fault
When the ignition is switched on, fixed
illumination of the indicator lamp in the button
indicates a fault with the system.
Have it checked by a PEUGEOT dealer or a
qualified workshop.