PEUGEOT 208 Handbook page 202

In the event of a breakdown
Light-emitting diodes - LEDs
For replacement, contact a PEUGEOT
dealer or qualified workshop.
200
Changing reversing lamp and
direction indicator bulbs
These two bulbs are changed from inside the
boot:
F Open the boot.
F Remove the access grille from the
corresponding side trim panel.
F Slacken and remove the nut.
F Disconnect the lamp unit connector.
F Unclip the lamp unit carefully extract it
pulling in line towards the outside.
F Press the four tabs and remove the bulb
holder.
F Turn the bulb a quarter of a turn and
change it.
To reassemble, carry out these operations in
reverse order.
Take care to engage the lamp unit in its guides,
while keeping it in line with the vehicle.
Tighten sufficiently to ensure sealing, but
without damaging the lamp.