PEUGEOT 208 Handbook page 203

Changing the third brake lamp
bulbs
F Unscrew the fixing pins on each side of the
lamp, without removing them completely.
F Push on the screws to unclip the lamp.
F Disconnect the lamp connector.
F Remove the lamp from the outside.
F Turn the bulb holder which corresponds
to the faulty bulb one quarter of a turn and
remove it.
F Pull the bulb and change it.
To refit, carry out these operations in reverse
order.
Number plate lamps
To facilitate the removal of the lamp, carry out
this operation with the tailgate half open.
F Insert a thin screwdriver into the lens
cutout.
F Push it outwards.
F Remove the lens.
F Change the faulty bulb.
To refit, press on the lens to clip it in place.
In the event of a breakdown
Changing a foglamp bulb
Access is by passing a hand under the bumper.
F Turn the bulb holder a quarter of a turn and
pull it out.
F Disconnect the connector on the bulb
holder.
F Pull the bulb out and change it.
To refit, carry out these operations in reverse
order.
You can also contact a PEUGEOT dealer or a
qualified workshop for the replacement of these
bulbs.
8
201