Chyron infinit! series Operation Manual page 858

CHYRON Corporation
The currently-selected font in Message Compose is dis-
played when this window first opens; pressing a different
Font Key (or
that font into the buffer and updates the
If the Font Key is unoccupied,
and
Font Not Loaded.
The currently-loaded Machine Font ID number. Entering
Font ID
a font number directly loads that font into the selected
Font Key. If a font ID is entered and not found to exist,
XXXX FONT FILE NOT FOUND
Line, and the following window appears:
Figure 21-8. FONT ID NOT FOUND
• Enter a name for the font, then press
Add Char Press A
key for the image, the
image to the current font. If the character exists, you're
prompted for overwrite permission.
The font is modified only in memory, not on the disk.
Delete Char Press D
RGB image from the font and requested key loca-
tion selected. The font is modified only in memory,
not on disk. Regular alphabet numbers, and marks,
characters cannot be deleted.
Press
Save to Disk RCD
font to disk. Overwrite request is prompted if the
font currently exists: either overwrite or enter a new
font ID number.
Pressing
Disabled Mix For Character Overlap
Prompt Line.
RGB Tools
ALT and a Font Key for fonts 9-16) loads
appears on the Prompt Line.
or select Add Char . Then, request a keyboard
Add Char
. Removes the selected
or select Delete Char
or select
Save to Disk
before disables character overlap, and
M RCD
21-16
field.
Font ID:
appears in the field,
0
appears on the Prompt
.
function adds the RGB
to write the modified
is displayed on the
Revision D