Chyron infinit! series Operation Manual page 599

You can design your own Read Effects transition, based
on the following parameters:
Each of the four Effect Types (§15.2) governs how an old
Effect Types
image leaves the screen and the new image enters the
screen:
• Either image (old and/or new) can move or remain sta-
tionary during the transition (
Revl
• You can select which image will be displayed on top of
the other during the transition (
The default setting is
Speed
Speed
The duration can range from
setting is
Reverse
Reverse
Can be
(§15.3.3) indicates whether or not the transition accel-
Ease
Ease
erates to set speed and/or decelerates from set speed, or
runs at a constant (set) speed.
can be set to
Ease
setting is
Revision D
iNFiNiT! Family Operation Manual
(Reveal)).
.
Wipe
(§15.3.1) specifies the duration of the transition.
to
2
.
60
60 fields = 1 second NTSC or PAL-M
50 fields = 1 second PAL
(§15.3.2) indicates the direction of the transition.
or . The default setting is
On Off
, ,
In Out In/Out
.
None
15-3
, , , and
Wipe Push Hide
and ).
Hide Revl
fields. The default
300
.
Off
, or . The default
None
Advanced Read FX