Honda 08E91-E54-100 Installation Instructions Manual page 7

24. Install the clip on the engine starter harness fuse
block to the control unit bracket.
ENGINE
STARTER
HARNESS
CLIP
FUSE BLOCK
25. Install the clip on the engine starter harness to the
vehicle bracket.
ENGINE
STARTER
HARNESS
CLIP
VEHICLE
BRACKET
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
CONTROL
UNIT
BRACKET
792402AY
792403AY
AII 51572 (1405)
26. Route the engine starter harness relay block to the
right side of the vehicle.
27. Attach the engine starter harness relay block to the
vehicle relay block.
28. Remove the blue tape from the vehicle 4-pin
connector (white). Plug the engine starter harness 4-
pin connector into the vehicle 4-pin connector.
VEHICLE
RELAY BLOCK
RELAY
BLOCK
ENGINE
STARTER
HARNESS
STEERING
WHEEL
VEHICLE
4-PIN
CONNECTOR
(WHITE)
BLUE TAPE
(Remove.)
ENGINE STARTER
HARNESS 4-PIN
CONNECTOR
792404AY
792501AY
7 of 20