Honda 08E91-E54-100 Installation Instructions Manual page 12

48. Secure the engine starter harness and 5-pin
connectors to the vehicle harness with one long wire
tie.
LONG
WIRE TIE
49. Unplug the vehicle 7-pin connector from the ignition
switch. Unplug the engine starter harness 7-pin
connectors, and plug one of the connectors into the
ignition switch and the other connector into vehicle 7-
pin connector.
VEHICLE
7-PIN
CONNECTOR
7-PIN
CONNECTOR
12 of 20
ENGINE
STARTER
HARNESS
5-PIN
VEHICLE
CONNECTORS
HARNESS
LONG
WIRE TIE
SECTION
VIEW
5-PIN
CONNECTORS
VEHICLE
HARNESS
IGNITION
SWITCH
7-PIN
CONNECTOR
ENGINE
STARTER
HARNESS
50. Secure the engine starter harness to the vehicle
harness with one wire tie.
VEHICLE
HARNESS
Antenna Installation
792603DY
51. Using scissors, cut a piece of urethane tape in half.
Wrap two halves of urethane tape around the
antenna cable.
URETHANE TAPE
(Cut in half.)
792604DY
AII 51572 (1405)
IGNITION SWITCH
ENGINE
STARTER
HARNESS
60 mm
(2.4 in.)
60 mm
(2.4 in.)
HALVES OF
URETHANE TAPE
(Do not fold
the antenna cable.)
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
WIRE
TIE
792705CY
ANTENNA
ANTENNA
CABLE
QB62501BK