Advertisement
3.
Using a plastic trim tool, pry out and remove the left
and right lens.
LEFT
4 RETAINING
LENS
TABS
4 RETAINING
TABS
4.
Open the sunglass holder.
VEHICLE
CONNECTORS
2 BLACK
SCREWS
5.
Remove the roof console.
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
ROOF
CONSOLE
RIGHT
LENS
PLASTIC TRIM
TOOL
700602BB
ROOF
CONSOLE
SUNGLASS
HOLDER
(Open.)
700603BB
2 SILVER
SCREWS
6.
Remove the two sunvisor holders by rotating them
90° counterclockwise.
SUNVISOR
HOLDER
Rotate.
7.
Flip the left sunvisor down. Wrap the end of a flat-tip
screwdriver with tape. Locate the slot in the bracket
cover, and insert the flat-tip screwdriver into the slot.
Push the hook with the screwdriver.
HOLDER
VANITY
MIRROR
LIGHT
CONNECTOR
Push upward.
8.
While pushing in on the hook, rotate the driver's
sunvisor backward about 45°. Make sure the hook
slides into the bracket cover. Remove the sunvisor.
NOTE: If the hook did not stay pushed in, return the
driver's sunvisor to its original position and repeat
steps 7 and 8.
AII 51572 (1405)
2 SUNVISOR
HOLDERS
FLAT-TIP
SCREWDRIVER
Push and hold the
retaining tab.
LEFT
SUNVISOR
(Turn rearward.)
700215BE
Rotate
towards
the door.
840902AY
3 of 20
Advertisement
