Silk'n DermBeaute Instructions For Use Manual page 9

Wet the exfoliating (3) brush.
Switch the appliance on by sliding the O I switch (1B) to the I position (on).
Gently move the brush in slow circular movements on the skin, whilst being
careful not to apply pressure on the face and avoiding the area around the eyes,
for approx:
20 seconds on the forehead
20 seconds on the nose and chin
10 seconds on each cheek
20 seconds on the neck and neckline
Rinse with cool or warm water.
Wash your face.
ACTIVATION
After having cleansed the face, apply the sponge (6) to the attachment part (1A).
Apply the cosmetic treatment that you normally use, on the treatment area.
Switch the appliance on by sliding the O I switch (1B) to the I position (on).
Move the sponge (6) in gentle circular movements on the various areas to help
the cosmetic product be absorbed.
MICRO-MASSAGE
If you prefer more intense action:
After having cleansed your face, apply the micro-massager (7) to the attachment
part (1A).
Apply the cosmetic treatment that you normally use, on the treatment area.
Switch the appliance on by sliding the O I switch (1B) to the I position (on).
Move the micro-massager (7) in small gentle circular
movements (without applying any pressure) on the various areas to help the
cosmetic product be absorbed and stimulate micro-circulation.
7