66
220SW 9 L CD
5.14 K ens ington L oc k
Must meet K ensington_slot.spec "T Y E -M0004".
MMD request metal plate in K ensington hole.
5.15 L abel
R egulatory label / C arton label should follow P hilips requirement.
C hina R oHS label
Detail document refer to P hilips E ngineering R eference B ook.
5.16 P roduc t dimens ion / Weight ( R efer to P hilips approved S HT 191/S HT 560 )
Unit dimension : 518.76 x 454.89 x 211.05 mm
P acked unit dimension: 590 x 532 x 185 mm
Net weight
G ross weight
5.17 T rans portation
T ransportation standards refer to T Y E -M0002.
5.17.1 T rans portation pac kages
Net weight P ackaging and wrapping shall be sufficient to protect the product against damage
or loss during shipment from the supplier to the destination specified in the purchase order.
All packaging materials are subject to test and evaluation per T Y E -M0002.
T he cushion material shall be constructed using E P S material.
T he doggy hole is requested.
5.17.2 T rans portation T es t
Overall tests refer to T Y E -M0002.
V ibration, drop test should be performed at ambient temperature (20°C to 23
humidity (40% to 65%).
A. T rans portation tes t s pec ific ation for all regions
P ackage test
1. R andom V ibration test
2. Drop test
3. C old Drop test (for design reference)
Un-package test
1. Half sine shock test (non operation)
5.18 P allet / C ontainer loading (R efer to P hilips approved S HT 560)
T ransportation standards refer to T Y E -M0002 and UAW -0309.
G eneral P roduc t S pec ific ation
: 5.6 K g
6.8K g
o
C ) and relative