Installing The Ice Maker - Insignia NS-IMK20WH7 User Manual

Tools and materials needed
Electric drill with a
1/4" drill bit
Flat blade
screwdriver
You'll also need:
• A freezer shelf to hold the ice storage bin. If your model does not have
one, contact your dealer to order one.
• Access to a household cold water line with water pressure between 20
and 120 psi.
The water line kit (including copper tubing and shut off valve) are
available in a kit (#5303917950) from your local hardware or plumbing
supply store.

Installing the ice maker

Your Insignia refrigerator comes set up for ice maker installation.
1 Unplug the refrigerator from the wall outlet.
2 Remove the freezer shelf and ice tray rack from the freezer.
Needle nose pliers
Putty knife
or nut driver
1/4" OD copper supply
line with compression
nuts and ferrules
Caution
Unplug the refrigerator. To eliminate the danger of electric shock
during installation, you must unplug the refrigerator.
www.insigniaproducts.com
Adjustable wrench
Shut off valve
Phillips
(non self piercing)
screwdriver
Ice Maker
Knife
Water line kit
#5303917950
5