Insignia NS-IMK20WH7 User Manual page 10

11 Mount the ice maker onto the two ice maker mounting screws you
installed in step 9. Make sure that the water inlet tube is sitting inside
the fill cup, then tighten the screws.
12 Adjust the leveling bracket to level the ice maker. The ice maker is level
when the gap between the freezer wall and the ice maker is the same
at the top and bottom.
10
Ice maker
mounting screws
Ice maker
Screws
Leveling bracket
www.insigniaproducts.com
NS-IMK20WH7
Water inlet tube
Fill cup