Starting And Stopping Scan; Responding To A Scan - Prodigi RDR3500 Instruction Manual

RDR3500
Communications Systems dealer Scan
ON/OFF side button or menu function
(RDR3600 only). When scan is initiated,
TM
radio will detect all channels / groups on
the programmed scan list.
• Auto Scan: Your radio automatically
starts scanning when you select a channel
/ group that has Auto Scan enabled.

Starting and Stopping Scan

Press the programmed Scan side button to
start or stop the Scan feature or follow the
procedure below (RDR3600
1. Use the Channel Selector Knob to select
a channel programmed with a scan list.
2. Press [ ] to access the menu.
3. Press [ or ] to navigate to Scan and
press [ ] to select.
4. The display shows Turn Off if scan is
disabled or the display shows Turn on if
scan is enabled.
/ RDR3600 Professional Digital Two-Way Radio Instruction Manual
TM TM
only):
TM
Copyright © 2015 RCA Communications Systems
5. Press [ ] to select.
6. The LED blinks red and the Scan icon is
displayed when Scan is enabled. The LED
turns off and the Scan icon disappears
when Scan is disabled.

Responding to a Scan

During scanning, your radio stops on any
channel / group where activity is detected.
After the transmission is over the radio remains
on the active channel for a programmed time
period known as "hang time".
1. Press the PTT button during hang time to
respond to the call. The LED lights up red.
2. Release PTT button to listen.
Note: If you do not respond within the hang
time period, the radio continues scanning
other channels / groups.
43