Remote Monitor (Only Rdr3600 Tm ); Initiating Remote Monitor; Contacts Settings (Only Rdr3600 Tm ) - Prodigi RDR3500 Instruction Manual

28
RDR3500
Remote Monitor
Use the Remote Monitor feature to turn on the
microphone of a target radio (subscriber alias
or IDs only). No audible or visual indication
is given to the target radio. You can use this
feature to monitor, remotely, any audible
activity surrounding the target radio. Note:
Your radio must be programmed by your RCA
Communications Systems dealer to allow you
to use the Remote Monitor feature.

Initiating Remote Monitor

Use the programmed Remote Monitor button.
1. Press [ ] to access the menu.
2. Press [ or
Contacts and press the [ ] to select.
3. Press [ or
subscriber alias or ID and press [ ] button
to select Or press [
Manual Dial, then press [ ] twice. Input
subscriber alias or ID and press [ ] button.
4. Press [ or
/ RDR3600 Professional Digital Two-Way Radio Instruction Manual
TM TM
(RDR3600 only)
TM
] button to navigate to
] button to the required
or ] button to
] button to Remote
Monitor and press [ ] button.
5. The screen will display remote monitor:
<Subscriber alias or ID>, indicating that
Remote Monitor is in progress. The LED
blinks red.
6. The display shows
Successful OR The display shows Remote
Monitor Failed.
7. If successful, the radio will start receiving
audio from the monitored radio for a
programmed duration. Once the timer
expires the LED turns off.
Contacts Settings
Contacts provide "address-book" capabilities on
your radio. Each entry corresponds to an alias or
ID that you can use to initiate a call. Additionally
each entry, depending on context, associates
with one of three types of calls: Group Call,
Private Call, All Call. Each entry within Contacts
displays the following information:
Remote Monitor
(RDR3600 only)
TM