Attaching / Removing Antenna; Attaching / Removing Belt Clip - Prodigi RDR3500 Instruction Manual

RDR3500
Attaching / Removing the Antenna
1. With the radio turned off, set the antenna
in its receptacle and turn clockwise until it
is screwed down. (See Figure 4)
2. To remove the antenna, turn the radio off
and turn the antenna counterclockwise.
(See Figure 5)
Note: Same procedure for RDR3500
Figure 4
R D R 36 00
/ RDR3600 Professional Digital Two-Way Radio Instruction Manual
TM TM
TM
Figure 5
R D R 36 00
* If antenna needs to be
replaced, ensure that only
RCA Communications Systems
antennas are used. Damaged
Antennas may reduce your
radio coverage.
Copyright © 2015 RCA Communications Systems
Attaching / Removing the Belt Clip
Using a small screwdriver, align the belt clip's
screw holes to the radio's chassis. Attach by
turning the screws clockwise into the belt clip's
screw holes. Remove by doing the reverse.
(See Figure 6)
13
Figure 6