Scan; Viewing An Entry In The Scan List; Scan Instructions And Methods - Prodigi RDR3500 Instruction Manual

42
RDR3500
tone sounds and the display shows Radio
Active failed.
Note: Do not press the [
to the previous Menu until the operation is
complete.

Scan

Scan lists are created and assigned to
individual channels / groups. The radio scans
for voice activity by cycling through the
channel/group sequence specified in the
scan list for the current channel / group. Your
radio can support up to 250 scan lists, with
a maximum of 16 members in a list. Each
scan list supports a mixture of both analog
and digital entries. You can add, delete, or
prioritize channels by editing the scan lists.

Viewing an Entry in the Scan List

1. Use the Channel Selector Knob to select
a channel programmed with a scan list.
2. Press [ ] to access the menu.
3. Press [ or
/ RDR3600 Professional Digital Two-Way Radio Instruction Manual
TM TM
] button to return
] to navigate to Scan and
press [ ] to select.
4. Press [ or ] to navigate to View List
and press [ ] to select.
5. Use [ or ] to view the members on
the scan list.
Note: If set as priority, the Priority icon appears
left of the member's alias, indicate whether
the member is on a Priority 1 or Priority 2
channel list. You cannot have multiple Priority
1 or Priority 2 channels in a scan list. There is
no Priority icon if priority is set to None.

Scan Instructions and Methods

When a scan is initiated, your radio cycles
through the programmed scan list for the
current channel looking for voice activity. The
LED blinks red and you see the Scan icon on
the display (RDR3600
There are two ways of initiating scan:
• Manual Scan: Initiate scan manually
using the programmed by your RCA
only).
TM