Sea Eagle Boats Fish-n-Troll Instruction & Owner's Manual page 3

Remove the Scotty Deck
mount bases from the rod
holders. The bases attach to
the 4 holes on either side of
the board.
Place the bases over the
holes in the board with
the "INBOARD" arrow
pointing to the center of
the board.
Using a #2 phillips head
screwdriver, secure the
mounts to the board with
the #6 screws.
Align the slot in the rod
holder with the key in the
base. Push the rod holder
into the base. When the key
goes through the slot, turn
the rod holder to the desired
position, push down to lock
in place.
Adjust the angle of the rod
holder by loosening the
large screw knob.
Mounting the Fish-n-Troll:
Secures to the SE9 via the motormount frame and attaches to
FastTrack™ and Explorer™ kayaks with adjustable self-locking
straps.
To FastTrack & Explorer
Place the board
between the 4 rings
at the back of the
kayak.
Flip a 4' strap
upside down
and slip the end
through the
front d-ring, then
through the back
d-ring.
Loop the strap
over the board
and through the
cinch lock on the
other end of the
strap.
Pull the strap tight
to secure to the
Fish-n-Troll to the
kayak.
Repeat on the
other side.
3