Related Manuals for Sea Eagle Boats PackFish7
Summary of Contents for Sea Eagle Boats PackFish7
- Page 1 PackFish7™ Instructions & Owner’s Manual For video instructions visit, SeaEagle.com/Instructions Sea Eagle Boats, Inc. 19 N. Columbia Street, Suite 1 Port Jefferson, NY 11777 1-800-748-8066 September 2019...
-
Page 2: Manufacturer's Certifications
Congratulations on purchasing a Sea Eagle! With over 50 years of experience in designing, selling and using these quality inflatables, we’re confident that you are going to love your Sea Eagle and we’re ready to proudly stand behind them. Manufacturer’s Certifications NMMA (for USA only) certification means that the boat, sold in the United States, has been judged by the National Marine Manufacturer’s Association to be in compliance with the U.S. - Page 3 Most states require you to register your boat if you are using a motor. (Please note, the Sea Eagle PackFish7™ is rated for use with a 1 hp motor by the NMMA. However, there is currently no provision for a motor mount.) Upon registration it may be required to provide the Manufacturer’s Statement of Origin.
- Page 4 Safety In a manual of this type, it is impossible to give adequate space to the topic of water safety. For further information on boating safety, visit USCGBoating.org or enroll in a water safety course given by a local provider. It is your responsibility to be aware of and comply with all relevant safety regulations.
- Page 6 PackFish7™ | Foot Pump Set Up The A42 foot pump comes with a hose and several To inflate boat, insert adapters. A hook-in style recessed valve adapter into adapter is needed for hose. Push adapter in hose valves on the boat. The...
-
Page 7: Assembly & Inflation
PackFish7™ | Assembly & Inflation Press and turn stem counterclockwise so it can pop UP. When the stem is up, valve is closed and will hold air. To let air escape for deflation, press and turn stem clockwise until locked open. -
Page 8: Inflation & Assembly
PackFish7™ | Inflation & Assembly Pump until firm. Insert wide push-in or DO NOT over inflate the screw-in adapter into hose. Push and turn tubes. Stop once you adapter to lock it into can press your thumb hose. about 1/2” into the tubes. - Page 9 PackFish7™ | Inflation & Assembly Slide blade onto shaft and adjust until the Due to bulk and weight button pops up through of boat and accessories, the hole. be cautious not to lose To remove blade, push balance or overexert button and pull blade yourself.
- Page 10 PackFish7™ | Deflation & Folding PackFish7™ | Storage PVC can become brittle in cold temperatures. To avoid damage, store in an area where sudden impacts are not possible. If leaving the Sea Eagle outside during boating seasons, keep it raised off the ground and covered so that it is not exposed to berries, leaves, rain, sunlight and other elements.
- Page 11 If you have a rough idea of where your leak is but can’t see it, break the seal. you may want to try listening for it as you may be able to hear the air escaping and pinpoint the leak. PackFish7™ | Trouble Shooting: Seat Valves PackFish7™ | Trouble Shooting: Boat Valves...
- Page 12 PackFish7™ | Trouble Shooting: Repairs PackFish7™ | Trouble Shooting: Air Bladder Even though your Sea Eagle is very rugged and tough, you may still experience the occasional puncture. Fortunately most repairs are fairly easy and only take a few minutes.
-
Page 13: Trouble Shooting: Repairs
PackFish7™ | Trouble Shooting: Repairs Patching Tips: • For immediate use, allow 30 minutes to cure and Trace the outline of a inflate ¾ full penny on the patch • Chamber must be deflated or air will make a path material and on the boat. -
Page 14: Optional Accessories
12”x2.5”x2.5”. Personal Flotation Devices (OPTIONAL) U.S.C.G. approved. Life jackets, paddling vest, PFD Belts available in various sizes. Sea Eagle Boats Inc. 19 N. Columbia Street, Suite 1 Port Jefferson, NY 11777 1-800-748-8066 Backpack Transport Staff@SeaEagle.com Straps (OPTIONAL) The PackFish can be carried backpack-style while inflated.