Battery Charging; Power Connection; Battery Times - Audiovox CDM-89100C User Manual

Audiovox cell phone user's guide
Table of Contents

Advertisement

BATTERY USAGE
C

BATTERY CHARGING

H
1

POWER CONNECTION

1
Plug the AC Charger into a standard outlet.
2
Plug the other end of the AC Charger into the
bottom of your phone. The battery must be
installed on the phone.
• The battery is not charged at the time of purchase.
• Fully charge the battery before using it for the first time.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace
the battery.
• Phone LED will light red and "Charging..." will be displayed on
the screen while charging is in progress.
• Phone LED will light green and "Charging is complete!" will be
displayed on the screen when the battery is fully charged.
• Typical charge times for a full charge.
Standard Batteries : 2~3 hours/Extended Batteries : 3~4 hours
12
BATTERY USAGE

BATTERY TIMES

The operating time is subject to your handset usage and configuration.
TALK TIME
STANDBY TIME
Battery Capacity
STD 1000 mAh
Up to 3.3 hours
These times are for a new battery. Usage and Standby time may
decrease over time.
13
C
H
1
Up to 7.9 days

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdm-8910c

Table of Contents