Rheem Loline 271 Owner's Manual And Installation Instructions page 34

INSTALLATION – SOLAR CONTROL UNIT
Note: The solar control unit automatically controls the flow rate through the collector circuit. This is achieved
via the hot and cold sensors and differential controller programming providing control over the operation of the
circulator. There is no provision for nor is adjustment to the solar control unit required.
refer to the installation
diagram on page
assembly details of solar
hot and solar cold pipe
connections
Solar Storage Tank (Single Element) with Solar Control Unit
SUPPLIED IN SOLAR CONTROL UNIT KIT (299280)
Hex nipple ½" X ½"
1.
4 way tee
2.
Hex nipple ½" x ¾"
3.
4. Preformed pipe DN15
5. Compression nut
6. Olive
7. Circulator
Solar control unit
8.
Solar Direct Pumped Electric Boosted Models
from solar
collectors
34 for
Screws
9.
Cold sensor probe
10.
Air bleed valve and non-return valve assembly
11.
12. Insulation 400 mm long x 12 mm diam
13. Insulation 150 mm long x 35 mm diam &
50 mm long x 35 mm diam
14. Cable tie
Plug ½"
15.
Single Element
to solar
collectors
34