A4Tech X-772FS User Manual page 3

(CD) first.
Software Installation
Installing "Smart-X7" software
A. Before installing the Smart-X7, uninstall any previous mouse
driver.
B. Insert the enclosed driver (CD) to start installation. Then you'll
see a "Figure C" pop up. (shown as the below figure)
C. Click "Install Driver" of the Smart-X7 to install the driver in
Figure.C.
D. Follow the on-screen steps to finish Smart-X7 software
installation.
E. When the installation is completed, restart your computer.
(Note: The driver is applicable to Windows 2000, XP, XP (x64), 2003(x64) and VISTA x86.)
Figure. C
F. The mouse icon " " will appear on the right bottom of the task
bar , then you have successfully installed the driver.
OR
Go to START, and then select PROGRAM. If you see "A4Tech
Hardware >> Mouse >>Smart-X7" in the program list, then you
have successfully installed the driver. (Otherwise, installation is
failed and you have to remove the driver and re-install.)
To remove the driver, follow the steps below:
Go to START, then select PROGRAMS >> A4Tech Hardware >>
Mouse >> Uninstall Smart-X7.