Page 2
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
Page 3
INTRODUCTION Congratulations on your purchase. Your new BatteryFREE 2X Click Wireless Optical Mouse will offer you wireless freedom, yet no battery is required. Whilst saving you the cost of batteries, it assures wrist comfort, light, easy operation and no-RF interference. As the Same time, Just one click on “2X Button”...
Page 4
SETTING UP YOUR MOUSE PAD AND MOUSE IS JUST A SECOND AWAY: 1. Plug the Mouse Pad’s USB plug to your computer’s Run-Green LED USB port. Power-Red LED 2. PWR LED on the Mouse Pad will be flashing in Tune Button “RED”...
Page 5
RFID mouse pad. 6. Do not place the mouse pad too close to CRT monitor, keep a distance of 20 cm TECH SUPPORT For tech support, please visit our website at http://support.a4tech.com/ or email us at support@a4tech.com WARRANTY...
Page 6
Product specification brief Mouse Model name: NB-30D Microprocessor: SN8P2602AP Operating voltage: 3.3+ 5% V Supply Power method: Electromagnetic Coupling Current consumption: (operating) MAX:25mA Communication mode : Simplex Duty Cycle: 240uS Dimension(outside): 113 x 63 x 36 mm weight: Transmission distance : Max:50mm(To Mouse pad distance) Modulation Method: ASK Modulation degree: Max: 15% The Tracking Resolution: 800CPI...
Need help?
Do you have a question about the BatteryFREE NB-30D and is the answer not in the manual?
Questions and answers