IBC DC Series User's Information Manual page 9

NOTE
The domestic hot water
thermostat is adjusted it its
lowest temperature position
when shipped from the
factory. It's recommended to
set the domestic hot water
thermostat to 120°F/49°C as
an initial setting and further
adjust as required. For
energy efficient operation,
this setting should be set
as low as practical for the
consumer's needs.
USER'S INFORMATION MANUAL
DC/HC SERIES BOILERS
PSI and Fahrenheit / Bar and Celsius
PSI and Fahrenheit are the default setting as shipped from the factory. To
change to Bar and Celsius simply press the
Programing Mode
USER MENU
Adjusting the Space Heating Water Temperature
To enter the User Menu simply hold down the Space Heating /DHW Toggle
button for 2 seconds. The LED beside the
maximum heating system water temperature will be displayed in the 4 digit
display. To alter this value simply press the Plus
Adjusting the Domestic Hot Water Temperature
Press the Space Heating /DHW Toggle
beside the will illuminate and the current tankless domestic hot water
temperature target is displayed in the Main Display. To alter this value simply
+
press the Plus or Minus
Saving the Changes
To exit from the User Menu and save the changes press the Reset
Pressing the On/Off button will also exit the User Menu but will NOT save the
changes.
to toggle Fahrenheit and Celsius.
will illuminate and the current
+
or the Minus
button a second time and the LED
-
buttons.
-
buttons.
button.
9