Mitsubishi 4g63 Service Manual page 19

INSTALLATION SERVICE POINTS
>>A<< CAMSHAFT SPROCKET BOLT
INSTALLATION
Tighten the camshaft sprocket bolt to 88 ± 10 N⋅m
while preventing the camshaft from rotation using a
wrench fitted on the hexagonal portion of the cam-
shaft.
>>B<< ENGINE SUPPORT BRACKET
INSTALLATION
1. Remove thoroughly the old sealant remaining on
the indicated bolt and in its hole.
2. Coat the bolt with sealant, then install and tighten
it.
Specified sealant:
Mitsubishi Genuine Part No.MD970389 or
equivalent
ENGINE OVERHAUL <4G63-Turbo>
TIMING BELT
>>C<< SEMICIRCULAR PACKING
INSTALLATION
1. Remove thoroughly the old sealant and FIPG
AK305990AC
2. Apply sealant to the surface indicated in the
3. Install the semicircular packing on the cylinder
AK304435
4. Apply sealant to the area indicated in the drawing
AK202743AB
remaining on the semicircular packing, cylinder
head, and rocker cover.
drawing of the semicircular packing.
Specified sealant:
3M ATD No.8660 or equivalent
head.
10 mm
Semicircular
packing
Cylinder head
of the semicircular packing and cylinder head.
Specified sealant:
3M ATD No.8660 or equivalent
11D-19
AK202860AB
10 mm
AK304411AB