Silk'n SensEpil Instructions For Use Manual page 16

Energy Level
Energy level determines the intensity of the Silk'n SensEpil™ light pulse delivered to your skin, from the
lowest level (-) to the highest level (+). Corresponding INDICATOR LIGHTS on the CONTROL PANEL
represent the increases in energy. As energy level increases, so does hair removal results as well as the
risk of possible side effects and complications. Whenever Silk'n SensEpil™ is turned on its energy level
will automatically be reset to the lowest energy level. Only one ENERGY LEVEL INDICATOR LIGHT
will be on. To set the energy level, press the ENERGY LEVEL SETTING BUTTONS using "-" or "+" to
respectively decrease or increase the energy level. The number of ENERGY LEVEL INDICATOR LIGHTS
will coincide with the change in energy level.
The Skin Color Sensor
Light-based hair removal on darker skin tones can result in adverse effects such as burns, blisters, and skin
color changes (hyper- or hypo-pigmentation). To prevent such misuse, a unique SKIN COLOR SENSOR
in Silk'n SensEpil™ measures the treated skin complexion at the beginning of each session and occasionally
during the session. If the SKIN COLOR SENSOR detects a skin tone that is too dark for Silk'n SensEpil™
application, the device will automatically stop emitting pulses. If you see no light pulse and the SKIN TONE
WARNING INDICATOR LIGHT blinks, this is an indication that your skin tone, measured by the SKIN
COLOR SENSOR, is too dark for safe application. Try using the device on a different body part or contact
the Silk'n support.
Covering skin areas
Silk'n SensEpil™ pulses should be administered in rows, starting at one end of each row and
progressing sequentially towards the other end. This technique allows better control of skin
coverage, and helps you avoid treating the same area more than once or overlapping skin
areas. When applied to the skin, the Silk'n SensEpil™ TREATMENT SURFACE is designed to
create temporary pressure marks on the treated area. These visible marks can be used for
proper positioning of the next pulse.
Try to avoid overlapping pulses!
Do not treat the same area of skin more than once per hair removal session!
If your skin blisters or burns, STOP USE IMMEDIATELY!
14