Data Count JR Operation Manual page 22

Problem
Machine does not start
counting.
Display screen
shows(X=1 or 2):
Clean Detector X
or(X=1 or 2):
Call Service ErX
Machine does not start
counting.
Display screen
shows(X=3 or 4):
Call Service ErX
Machine has stopped.
Display screen shows:
Place Cup or Bag
* If problem persists, consult a qualified technician.
Possible Causes
Something is
disrupting the
sensor's detection
line.
Synchronization
problem.
Bag was taken out
while machine was
working.
22
Solution
Use compressed air to
clean the detector (see
chapter "Cleaning the
counting detectors".*
Turn the machine off, wait
for 5 seconds and turn it
back on. *
Manually pick up seeds
that have fallen out
through the machine's
outlet.
Replace bag to continue
counting. *