Using The Boost Button - Data Count JR Operation Manual

6. Choose the correct seed size according to the seeds size table
at the end of this manual.
Press to select one of the sizes on the control panel:
7. You can also set specific sizes by using
8. Set the Track width to one to two seeds wide according to the
desired accuracy and speed (the narrow the track is, the count
is more accurate).
9. Press
When SEED count JR finishes counting all the seeds, the
number of seeds appears on the display screen. Often, the last
few seeds take a little longer to be counted, so SEED count JR
continues working for one more minute after it has counted a
seed. At the end of one minute, SEED count JR beeps to
indicate that it has finished. You can press
hear the beep, to stop the machine

Using the Boost Button

It takes approximately one minute from the time the machine starts
operating, until the first seed reaches the counter. Also, at the end
of the counting process, there may be a number of seeds that are
progressing slowly towards the bowl's outlet. You can use the
to speed up the process. If this doesn't help, you can use a
pair of tweezers to carefully help the last seeds fall into the funnel.
to begin counting.
14
and
, before you
.
.