Data Count JR Operation Manual page 19

8. You can also set specific sizes by using
Doing so, improves the performance of the end of the counting
process, by setting the pulses' width exactly according to the
set size.
9. Set the Track width to one seed wide.
10. Press
When SEED count JR reaches the preset number of seeds,
the actual number of seeds in the bag (which may be a few
more than the preset number) appears on the display screen.
SEED count JR beeps to indicate that it has finished and the
word "Ended" shows on the display screen.
11. Remove extra seeds from the bag, if necessary.
12. Press
preset number of seeds and the chosen size, for example:
1.1-1.6 => 100
Press
Count Until?
or press
number of preset seeds and the same seed size.
to begin counting.
to go to the start screen. The display shows the
to reset to:
again to start a new batch with the same
19
and .