Table Of Beep Tones - Panasonic WX-CT420 Operating Instructions Manual

Table of beep tones

This product conveys the messages in the table below to the user using different beep tones.
Category
Customer notification
System notification *2
Message recording *2
Talk & page
Volume adjustment
Other
*1 Some tones may sound the same but their intervals or speed may differ.
*2 For further details of the functions, refer to the operating instructions of the Center Module.
Message
Lane A
Lane B
Mode change
(Start of speed team operation)
Message recording start
Message recording end
Message recording end countdown
Communication establishment
(Talk start, page start, alert notification)
Communication end
(Talk end, page end)
In-range notification tone
(When the status in which communication with the
Center Module is enabled has been established
from the out-of-range status)
Communication error
(When talking, paging, etc. is not possible)
Volume level up
Volume level up (upper limit)
Volume level down
Volume level down (lower limit)
Error occurrence
Remaining battery level warning
Beep tone *1
BEE (at intervals of 2 seconds or so)
BU-BU (at intervals of 2 seconds or so)
BU-BUU
BUU
BU-BU
BUU-BUU-BUU-BEE
BEE
BUU
BE-BEE
BU-BU-BU-BU
BEE
BE-BEE
BUU
BU-BU
BUU-UU-UU
BUU-UU (at intervals of 5 seconds or so)
23