Activation / Deactivation; Function Surfaces - Skoda SUPERB Owner's Manual

Note
The camera is equipped with a cleaning system
ried out automatically when the rear window is sprayed.
Operation
Fig. 174 Installation location of the camera / scanned area behind the ve-
hicle

Read and observe and
The camera for capturing the area behind the vehicle is in the grip of the boot
lid » Fig. 174.
Area behind the vehicle » Fig. 174
Detection range of the camera
A
Area outside the detection range of the camera
B
The system can assist the driver when parking and manoeuvring under the fol-
lowing basic conditions.
The ignition is switched on.

The system is activated.

The luggage compartment lid is completely closed.

The vehicle is travelling at less than 15 km/h.

The area behind the vehicle is clearly visible.

The selected parking / manoeuvring area is clear and even.

138
Driving
» page 74. The spraying is car-
on page 137 first.

Activation / deactivation


Read and observe and
Activation
The system is activated by selecting reverse gear or pressing the symbol 
button» Fig. 175.
When activating, an alarm sounds and the symbol
The display mode for the traverse parking is displayed.
Deactivation
The system is deactivated by pressing the  button, switching off the ignition
or when the speed exceeds 15 km/h (the
out).

Function surfaces


Read and observe and
It is possible to adjust the parking and manoeuvring mode by means of the
function surfaces.
Fig. 175
Button for activation / deactiva-
tion
on page 137 first.
illuminates in the button.

symbol in the button then goes

Fig. 176
Function surfaces
on page 137 first.
