Download Print this page

Peavey Combo 7/9780300698 Operating Manual page 6

Combo series bass amps

Advertisement

Available languages

Available languages

Combo 115 Rear Panel
22
21
20
Combo 210TX Rear Panel
22
21
20
LINE CORD (120V PRODUCTS ONLY) (20)
For your safety, we have incorporated a 3-wire line (mains) cable with the proper
grounding facilities. It is not advisable to remove the ground pin under any circum-
stances. If it is necessary to use the equipment without the proper grounding facilities, suitable
grounding adapters should be used.
FUSE (21)
The fuse is located in the cap of the fuse holder. If the fuse should fail, IT MUST BE
REPLACED WITH A FUSE OF THE SAME TYPE AND VALUE IN ORDER TO AVOID
DAMAGE TO THE EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY. If the amp
repeatedly blows fuses, it should be taken to a qualified service center for repair.
WARNING:
THE FUSE SHOULD ONLY BE REPLACED WHEN THE POWER CORD HAS BEEN
DISCONNECTED FROM ITS POWER SOURCE.
GROUND POLARITY SWITCH (22)
The ground switch is a three-position rocker switch which, in most applications, should be
operated in its center or zero position. There may be some situations when audible hum and/or
noise will come from the speaker. If this situation arises, position the ground switch to either
the positive or negative (+/-) position or until the noise is minimized.
23
23
6
25
24
25
24

Advertisement

loading

This manual is also suitable for:

Combo 115Combo 210tx