(2) this device must accept any interference received, that may cause undesired operation. Warning: Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the user’s authority to use the equipment. Note - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Other features on the rear panel include: Effects Loop, Microphone Simulated Direct Interface (MSDI™) with XLR output and USB out, speaker defeat switch and 3 position power attenuator switch. The Classic 20 MH exhibits a tremendous amount of versatility in a small package; it features real tube tone, real tube power! It contains no simulations, emulations or approximations.
FUSE ENABLE SEND CHNL/BOOST DEFEAT F2AL/250V GRND 100V 115V LIFT Classic 20 MH ® Front Panel MICROPHONE SIMULATED CLASS 2 50/60 Hz WIRING USB AUDIO MSDI 90 WATTS RECORD OUT 20W RMS/ 17.9V RMS (MIC SIMULATED DIRECT INTERFACE) RETURN RVRB/LOOP MIN.
* For an informative description of the STANDBY function, please read the Chapter 6 (Standby...For the Truth) of Hartley Peavey's White Papers included on this disc. POWER switch To apply power to the unit, connect the line cord and flip the switch to the ON position. The pilot light (#8) and the T.S.I.
® Classic 20 MH Rear Panel BUILT UNDER U.S. PATENT NO. 7,145,392 A PRODUCT OF OUTPUT SPKR GRND PEAVEY ELECTRONICS CORP . LIFT 220-230V DESIGNED AND ENGINEERED IN U.S.A. MADE IN CHINA SEND CHNL/BOOST ENABLE FUSE DEFEAT F2AL/250V GRND 100V...
The load impedance is selectable via the IMPEDANCE SELECTOR (#16). The Classic 20 MH sounds great into a 1x12, but try this into a 4x12 and see the reaction you get! SPEAKER ENABLE/DEFEAT SWITCH This feature effectively disconnects any speaker/cabinet connected to the SPEAKER OUTPUT (#17) and redirects the output to an internal dummy load.
‘Ring’ (Left on a Peavey footswitch): Turns the effects loop on or off. ‘Tip’ (Right on a Peavey footswitch): Turns the reverb on or off. Peavey footswitches are available with and without LEDs to indicate current settings. Please refer to www. peavey.com or customer services for more information and product codes.
® Classic 20 MH All-Tube Guitar Amplifier SPECIFICATIONS Rated Power: 20 W(rms) into 8 or 16Ω Special 2-button unit with LED *Features and specifications indicators (#00579720) subject to change without notice. One footswitch for channel selection Power Consumption: (Domestic) 90 and boost functions.
What Peavey Will Do We will repair or replace (at Peavey’s discretion) products covered by Warranty at no charge for labor or materials. If the product or component must be shipped to Peavey for Warranty service, the consumer must pay initial shipping charges. If the repairs are covered by Warranty, Peavey will pay the return shipping charges.
U.S. customer warranty registration. Logo referenced in Directive 2002/96/EC Annex IV (OJ(L)37/38,13.02.03 and defined in EN 50419: 2005 The bar is the symbol for marking of new waste and is applied only to equipment manufactured after 13 August 2005...