Advertisement
Available languages
Available languages
Indicator light and function settings
1.
Press On/Off button once – LED green light in Low-speed function
2.
Press On/Off button twice – LED blue light in Hi-speed function
3.
Press On/Off button three times – Green pulsating light slow pulsating motions
4.
Press On/Off button four times – Blue pulsating light in fast pulsating motions
5.
Press On/Off button five times – LED light and device turned off
After 60 seconds the device switches off automatically
How to use
Dampen your face with warm water. Press firmly to the area you want to treat, select mode and
move the SonicCleanPlus in an upward, circular motion. Recommended treatment time per area is 30
seconds for each area - forehead, nose, chin and each cheek. The micro-fiber bristle brush applicator
is effective in removing the outer layer of dry and flaky skin cells, lifting out impurities from within
the pores and build-up of debris from within the folds of fine lines and wrinkles to help smooth the
surface of the skin.
The SonicCleanPlus has been tested for water ingress to the extent covered by IP-X5. This means you
can clean the device under the running tap or using a damp cloth even when the device is switched
on. However, it is not suited for submerging in water or other liquids.
For use in combination with skin care solutions
Apply cleanser, scrub or microdermabrasion cream onto the skin – spread it into a thin layer over the
skin before use. Press firmly to treated area, select mode and move SonicCleanPlus in an upward,
circular motion. Recommended time per treated area is 30 seconds for each area - forehead, nose,
chin and each cheek.
Caring for your facial brush heads
1.
Clean brush heads after every use. Remove the brush head, rinse it clean with warm water and
mild soap to remove any build-up that may have accumulated, shake off excess water and towel
dry – or gently rub the brush head against a towel for 5-10 seconds while it is switched on. Do
not attach wet brush heads to the handle while charging.
2.
Do not allow liquid cleansers or moisturizers to accumulate on Brush Heads.
3.
Replace brush heads every 3 months for best cleansing results. – they can be purchased from
your retailer or online at silkn.com
Caring for your cradle
1.
To clean the cradle, unplug it from the main power first. Use a slightly damp cloth and avoid
leaking water onto the bottom of the cradle and adapter contact pins. Towel dry the cradle im-
mediately after cleaning.
2.
Never use water to clean the adapter hole, adapter plug or any other exposed electrical con-
tact on the device, cradle or adapter supplied with it.
Caring for your brush handle
1.
Do not use abrasive cleaners or chemicals to clean any part of the SonicCleanPlus.
2.
Clean the handle with a damp cloth – using mild detergent or warm water and towel dry im-
mediately after cleaning.
Disposal
Dispose of the packaging at a recycling point which sorts materials by type.
Products marked with this symbol should not be disposed of along with household
refuse! You are legally bound to dispose of old appliances separately from household
refuse. Information about where old appliances can be disposed of free of charge is
available from your local authorities.
EN
Advertisement
