Audiovox Prestige P-953ESP Owner's Manual page 4

4 4 4 4 4
BASS CONTROL
To adjust the bass level (Equalizer function inactive), first select
the Bass mode by pressing the SEL button
appears on the display panel. Within 5 seconds of choosing the
Bass mode, press the AUDIO CONTROL
decrease the bass response, or the
to increase it as desired. The level will be shown on the display
panel from a minimum BAS --10 to a maximum of BAS 10 (BAS
00 indicates flat response). The display will automatically return to
the normal indication 5 seconds after the last adjustment or when
another function is activated.
5 5 5 5 5
TREBLE CONTROL
To adjust the treble level (Equalizer function inactive), first select
the Treble mode by pressing the SEL button
indication appears on the display panel. Within 5 seconds of
choosing the Treble mode, press the
2
to decrease the treble response or the
button to increase it as desired. The level will be shown on the
display panel from a minimum TRB --10 to a maximum of TRB 10
(TRB 00 indicates flat response). The display will automatically return
to the normal indication 5 seconds after the last adjustment or when
another function is activated.
6 6 6 6 6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance mode
3
by pressing the SEL button
the display panel. Within 5 seconds of choosing the Balance mode,
press the AUDIO CONTROL button
balance to the left channel speakers or the
button to adjust it to the right channel speakers. The balance position
will be shown on the display panel from BAL 10L (full left) to BAL
3
so the BAS indication
2
button to
AUDIO CONTROL button
3
so the TRB
AUDIO CONTROL button
AUDIO CONTROL
so the BAL indication appears on
2
to adjust the stereo
AUDIO CONTROL
10R (full right). When the volume level between the left and right
speakers is equal, BAL L=R will be shown on the display panel.
The display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is
activated.
7 7 7 7 7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode
3
by pressing the SEL button
display panel. Within 5 seconds of choosing the Fader mode, press
the AUDIO CONTROL button
balance to the front speakers or the
adjust it to the rear speakers. The fader position will be shown on
the display panel from FAD 10R (full rear) to FAD 10F (full front).
When the level between the front and rear speakers is equal,
FAD F=R will be shown on the display panel. The display will
automatically return to the normal indication 5 seconds after the last
adjustment or when another function is activated.
8 8 8 8 8
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will boost
the bass and treble ranges to compensate for the characteristics of
human hearing. Press and hold the BAND/LOUD button for 2
seconds to activate this feature; the unit will beep and LOUD ON will
appear on the display for 5 seconds. Pressing the button again for 2
seconds will deactivate the feature; the unit will beep and LOUD
OFF will appear on the display panel for 5 seconds.
9 9 9 9 9
AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the volume from the system
(MUTE will appear blinking on the display panel). Pressing the button
again or activating any other button/function will return to the volume
level setting in use before the Mute function was activated. During
-4-
so the FAD indication appears on the
2
to adjust the front-rear speaker
AUDIO CONTROL button to
128-6880
4 of 20