Kiddicare Isabelle Instruction Manual page 10

assembly
The dresser is supplied with a fixing kit which will secure it and help to guard against accidental
tipping.
WARNING : Installation only to be carried out by a competent person.
Check the suitability of the wall before fitting.
Washer x 2
Plastic wall plug
(For brick or masonry wall use only)
1. Place dresser against the wall where it is to be fitted. Mark the wall 25mm (1") down from the top
surface of the changer.
2. Using the 25mm screw, washer and the appropriate wall fixing attach the fabric strap to the
marked position.
3. Remove the top drawer and thread the free end of the strap through the slot in the back panel.
4. From the inside of the dresser, attach the fabric strap to the dresser frame using the 15mm screw
and the washer.
Refit the top drawer.
Before use, ensure that the strap is securely fixed to both the wall and the dresser.
The type of wall fixing you will require depends on the construction of the wall. See below for details.
If in doubt, seek professional advice.
Wood: If fixing to wood make
sure that it isn't chipboard as
screws can easily pull away the
10
core structure.
Screw (15mm)
1
2
Brick or masonry: Use the
wall plug, provided you are
sure that your wall is sound.
3
Cavity wall: Special toggle
wall plugs needed.
Seek expert advice.
Screw (25mm)
Fabric strap
4