Break-In; Engine; Belt; Hour/30DaysInspection - cectek Kingcobra Manual

BREAK-IN

The first 10 hours is the most important period of your vehicle. Proper break-in will help assure
the maximum life performance of your vehicle.
CAUTION
Never add oil into fuel. There is
4-strokeengineinthisvehicle.Oil
only can be filled into the crank
case.

Engine

MaximumThrottleOpening
In the first 10 hours break-in period, engine should not be operated at full throttle. We strongly
suggest that operating the vehicle below 3/4 throttle, by smooth acceleration with speed
variation in the break-in period. During the break-in period, continuous wide open throttle,
prolonged cruising speeds, and engine overheat can deteriorate the potential performance of
theengine.
VaryTheEngineSpeed
Varying the engine speed during the break-in period can aid the parts mating (load) and cooling
(unload) process. Be careful not to overload the engine.
AvoidContinuouslyLowSpeed
In the throttle opening range, operate the engine to accelerate freely and thoroughly.
WarnUpTheEngineBeforeDriving
After cold or warm starting, allow the engine run in enough idle time for lubrication oil circulating
through all parts of engine.

Belt

The new belt require brake-in period. In the first 50km, do not operate the vehicle in strong
acceleration/deceleration, high loading, and high speed cruising.

10HOUR/30DAYSINSPECTION

We strongly suggest that after the first 10-Hour break-in period or 30 days after purchase,
which ever come first, your vehicle should be inspected by authorized CECTEK dealer.
CECTEK dealer will provide you professional suggestion of enjoying the operation of the
vehicle and answers for your questions about your vehicle.
The 10-Hour or 30 days inspection is at the expense of the vehicle owner.
34