Brake Fluid; Brake Fluid Level - cectek Kingcobra Manual

1 Engine Coolant Maximum Level
BrakeFluid
Only DOT 3 brake fluid can be filled into the brake system.
CAUTION
Use brake fluid other than the DOT3
or mix different brake fluids for topping
up could cause serious damage of
your vehicle.
BrakeFluidLevel
1. Put the vehicle on a level surface. Remove the front access panel.
2. Turn the steering handle in the neuter position and confirm the hand brake reservoir is level.
3. Confirm the brake fluid is above the MIN. mark.
4. Clean filler cap before removing.
5. Unscrew the two bolts on the filler cap and remove the reservoir cap on the steering handle.
Turn the cap of reservoir under the front access panel counterclockwise to remove the cap.
6. Fill the DOT 3 brake fluid in to the reservoir.
7. Reinstall the filler cap. Visually inspect and confirm no leakage of brake fluid.
1
31