PreparationForCleaning; WashingYourVehcile - cectek Kingcobra Manual

PREPARATIONFORCLEANING

1. Block off the end of the exhaust pipe to prevent water entry. A plastic bag, cloth rag may be
used to prevent water from entering the engine.
2. Make sure the spark plug and all filler caps are properly installed.
Excessive water pressure can damage your vehicle.
Excessive water pressure may damage the parts of vehicle
and result of the corrosion or increase wear.
Do not use excessive water pressure to clean your vehicle.
Radiator fins can be damage by excessive water pressure.
Do not spray excessive water pressure on the radiator fins.

WASHINGYOURVEHCILE

1. Use only enough pressure to wash your vehicle.
2. Rinse the vehicle with clean and mild, detergent-type soap thoroughly. Cloth rags, washing
mitts or cleaning brushes can be used. Be care with brushes, they will scratch plastic or
painted surface.
3. Rinse the vehicle off immediately with clean water and dry all surface with a chamois, clean
towel or soft absorbent cloth.
4. Dry the chain and lubricate it to prevent rust.
CAUTION
Avoid spraying or allowing water entry following place.
Ignitionswitch
Spark plug
Fuel tank cap
Throttlevalve
Brakemastercylinder
Air intake for air filter and carburetor
Radiator fins and cooling fan
118
CAUTION
Warning