SmartWatch® Network Video Recorder User Manual
2. Click
to edit the HDD you want to protect.
3. Set the HDD property to Read-only.
4. Click OK to save settings and revert back to the upper level menu.
You cannot save any files to a Read-only HDD. If you want to save files to the HDD, change the property
to R/W.
If there is only one HDD and is set to Read-only, the NVR will not record any files. Only live view mode
is available.
If you set the HDD to Read-only, the NVR is writing files to it, then the file will be saved on the next HDD.
If there is only one HDD, recording will be stopped.
Figure 5. 37 HDD General
Figure 5. 38 HDD General- Editing
68