Table of Contents
Advertisement
SmartWatch® Network Video Recorder User Manual
11.2 Configuring Privacy Mask
You can configure four-sided privacy mask zones that cannot be viewed by the operator. The privacy mask can
prevent certain surveillance areas to be viewed or recorded.
Steps:
1. Enter the Privacy Mask Settings screen.
Menu > Camera >Privacy Mask
2. Select the camera to set privacy mask.
3. Click the checkbox of Enable Privacy Mask to enable this feature.
4. Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.
Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.
5. The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear
Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
6. Click the Apply button to save the settings.
Figure 11. 2 Privacy Mask Settings Screen
Figure 11. 3 Set Privacy Mask Area
143
Advertisement
Table of Contents
