Adjusting Live View Settings - Smartwatch H20NVR4 Installation Manual

SmartWatch® Network Video Recorder User Manual

3.3 Adjusting Live View Settings

Live View settings can be configured to suit the end user. You can configure the output interface, dwell time for
cameras, on/off audio, the screen number for each channel, etc.
Steps:
1. Enter the Live View Settings screen.
Menu> Configuration> Live View
The settings available in this menu include:
•
Video Output Screen: Output to be configured. Only VGA/HDMI is selectable by default.
•
Live View Mode: Display mode to be used for Live View.
•
Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switch in Live
View.
•
Enable Audio Output: Enables/disables audio output.
•
Event Output: Select the output to show event video.
•
Full Screen Monitoring Dwell Time: The time in seconds to display alarm event screen.
2. Setting Cameras Order
1) Select a View mode:
2) Double-click on the channel number to display the channel in the window.
Figure 3. 14 Live View-General
Figure 3. 15 Live View- Camera Order
.
39