Smartwatch H20NVR4 Installation Manual page 15

SmartWatch® Network Video Recorder User Manual
No. Name
8 INFO Button
9 VOIP Button
10 MENU Button
11 PREV Button
12 DIRECTION Button
ENTER Button
13 PTZ Button
14 ESC Button
15 RESERVED
16 F1 Button
17 PTZ Control Buttons
18 F2 Button
Troubleshooting Remote Control:
Make sure you have installed the batteries correctly in the remote control. The IR receiver in the front panel.
If there is no response after you press the remote, follow the procedure below.
Steps:
1. Go to Menu > Settings > General > More Settings by using the mouse.
2. Check and remember the NVR ID#. The default ID# is 255. This ID# is valid for all the IR remote controls.
3. Press the DEV button on the remote control.
Description
Reserved.
To switch between the main and spot output.
In PTZ Control mode, it can be used as zoom.
To return to the main menu.
Press and hold the button for 5 seconds will turn off the audible key beep.
In PTZ Control mode, the MENU/WIPER button will start wiper (if
applicable).
In Playback mode, it is used to show/hide the control interface.
Switch between single screen and multi-screen mode.
In PTZ Control mode, it is used to adjust the focus in conjunction with the
A/FOCUS+ button.
Navigate between different fields and items in menus.
In the Playback mode, the Up and Down button is used to speed up and
slow down recorded video. The Left and Right button will select the next
and previous record files.
In Live View mode, these buttons can be used to cycle through channels.
In PTZ control mode, it can control the PTZ direction.
Confirm selection in any of the menus.
It can also be used to tick checkbox fields.
In Playback mode, it can be used to play or pause the video.
In single-frame Playback mode, pressing the button will forward the
video to the next frame.
In Auto-switch mode, it can be used to stop /start auto switch.
Back to the previous menu.
Press for Arming/disarming the device in Live View mode.
Reserved for future usage.
Select all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ lamp (if applicable).
In Playback mode, it is used to switch between play and reverse play.
Buttons to adjust the iris, focus and zoom of a PTZ camera.
Cycle through tab pages.
In synchronous playback mode, it is used to switch between channels.
15