Alternate Out Features; Alternate Out Level; Sum Mono; Pre Switch - Crest Audio X-Four Owner's Manual

alternate out features

The output section allows assignment of the left and right
ALTERNATE
signals (plus center—if
anced male XLR connectors on the rear-panel.
By utilizing the mode switches located below the
signals can be derived in a number of ways. In default mode (no switches
depressed), the post-fader left and right
ed through the
ALT OUT

alternate out level

This control sets the levels that appear at the
balanced XLR connectors on the rear-panel.

sum mono

The main left and right (and mono/center) signals are summed
together as a mono signal.This signal is then routed through the
level control and appears at the left and right
connectors on the rear-panel.
The main left and right (and mono/center) signals are routed in
stereo through the
ALT OUT
balanced male XLR connectors on the rear-panel.
ALT OUT

pre switch

The left and right (and mono/center) master faders have no effect on
the left and right (and mono/center) signals routed through the
level control and appear at the left and right
connectors on the rear-panel.
The left and right (and mono/center) master faders control the lev-
els of the left and right (and mono/center) signals routed through the
level control and appear at the left and right
OUT
connectors on the rear-panel.
XLR
- - is selected) to a separate pair of bal-
LCR TO OUTPUTS
ALT OUT
(in center) signals are rout-
MASTER
level control and appear at the
ALT OUT
Level control and appear at the left and right
ALT OUT
MASTER
level control,these
connectors.
ALT OUT
left and right
ALT OUT
ALT OUT
balanced male XLR
ALT OUT
balanced male XLR
ALT
balanced male
ALT OUT
master module
5
p. 65