USCutter SC User Manual page 3

Locations for use and storage
Where to use and store your vinyl Cutter
Location, Location, Location! It's not just important for real estate. Where your vinyl
cutter "lives" in your home or business is a vitally important element of your success.
You need access to a 110 volt grounded electrical outlet. That's the standard
1
household kind with three holes, not two. Be safe... don't plug your cutter into
an already over-crowded powerstrip or system of extension cords.
Dust and dirt will limit the useful life of your cutter. If you use it in a dusty or
2
dirty environment the cooling fans will suck in the dust and it will get inside
the machine and gum up the works.
Operate on a stable surface. A solid flat surface is needed for your vinyl cutter
3
to do its best work. If it wobbles or vibrates during operation your cut is not
going to be as sharp and clean as it could be.
Access is important. The SC Cutter is a large machine, but it doesn't belong in
4
the corner during use. You'll need to access the front and back of the cutter to
operate it and change the vinyl rolls.
There will be some noise when the cutter is in use. Take that into account
5
when you locate your vinyl cutting headquarters.
Position the SC Cutter near enough to your computer to be able to attach it via USB
6
cable or 9-pin serial cable. Internet access will be necessary for downloading drivers
and software.
425.481.3555
2
4
www.uscutter.com
Before starting work, please check whether the
following items are all present.
K
J
I
M
E D
B F
If any parts seem to be missing from your package
please contact support @1-888-975-2047
425.481.3555
What's in the box
Items:
L
A:
Foot
B: Cutter
C: Casters
D:
Cross Brace
E:
Roller Bars
F:
Leg
G
G:
Mount
H
H:
Roller Bracket
I:
Power Cord
J:
USB Cable
K:
9 Pin Adapter
A
C
L: Screw Bag
M:
Vinyl Software
3
5
www.uscutter.com