First Use - Dolce Gusto GENIO User Manual

F I RST U S E
1
Rinse water tank at first.
Fill water tank with fresh, drinking water.
Place cap and insert water tank into machine.
4
Start rinsing with cold water:
Push the lever up to set the bar display to
maximum level. Move lever to the left for cold
water rinsing.
7
Machine starts rinsing.
Wait until countdown is finished and machine
stops.
2
Open locking handle and insert empty capsule
holder. Close locking handle.
Place capsule bin under coffee outlet.
Connect power plug to mains power socket.
5
Machine starts rinsing.
Wait until countdown is finished and machine
stops.
8
STOP
Empty capsule bin and refill water tank with
fresh, drinking water.
3
Switch machine on. While machine is heat-
ing up, power button starts blinking red. After
approx. 30 seconds, power button light turns
steady green and machine is ready.
6
STOP
Continue rinsing with hot water:
Push the lever up to set the bar display to
maximum level. Move lever to the right for hot
water rinsing.
9
Remove protection foil from drip grid. Place
drip grid on drip tray. Then attach drip tray at
desired position on machine.
8
ON
30 sec