ABB i-bus KNX Product Manual page 76

ABB i-bus KNX
© 2009 Busch-Jaeger Elektro GmbH – A Company of the ABB Group
Commissioning
No. Function
34 Switch fan coil stage 1
This 1-bit communication object can be used to send an ON telegram, if the first fan stage is
to be switched on. An OFF telegram is sent, if the first fan stage is no longer to be switched
on.
This data item forms the 1-bit KNX object and can be sent and received.
35 Switch fan coil stage 2
This 1-bit communication object can be used to send an ON telegram, if the second fan stage
is to be switched on. An OFF telegram is sent, if the third fan stage is no longer to be
switched on.
This data item forms the 1-bit KNX object and can be sent and received.
36 Switch fan coil stage 3
This 1-bit communication object can be used to send an ON telegram, if the third fan stage is
to be switched on. An OFF telegram is sent, if the third fan stage is no longer to be switched
on.
This data item forms the 1-bit KNX object and can be sent and received.
Object name Data type
Fan manual 1 Bit EIS1
DPT 1.001
Fan manual 1 Bit EIS1
DPT 1.001
Fan manual 1 Bit EIS1
DPT 1.001
Flags
K, S, Ü,
L
K, S, Ü,
L
K, S, Ü,
L
75