HP 2920 Installation And Getting Started Manual page 105

L
LED
stacking module ... 2-9, 2-10
LEDs
Act ... 1-8
behavior during switch boot ... 2-7
blinking definition ... 1-9, 1-10
checking during troubleshooting ... 5-12
error indications ... 5-4
fan status ... 1-8
Fault
behavior during self test ... 2-7
showing error conditions ... 5-4
fault ... 1-7
FDx ... 1-8
Link ... 1-7, 1-16, 1-18
location on switch ... 1-2
Mode ... 1-7
Mode LED View select indicators ... 1-8, 1-10
on switch ... 1-7
PoE ... 1-8
port
description ... 1-7
Port View
selecting the display ... 1-11
Power ... 1-7
behavior during self test ... 2-7
Spd ... 1-8
stacking related ... 1-10
switch
descriptions of ... 1-6
Switch Boot
behavior during switch boot ... 2-7
Test ... 1-7
TMP Status ... 1-9
Usr ... 1-8
Link LEDs ... 1-7, 1-16, 1-18
link test ... 5-13
location for the switch, considerations ... 2-5
M
MDI-X to MDI network cable ... B-7, B-9
MDI-X to MDI-X network cable ... B-8
Mode LEDs ... 1-7
module
install or remove ... 2-10
module slot ... 1-14
mounting the switch
in a rack or cabinet ... 2-12
precautions ... 2-4
on a horizontal surface ... 2-15
N
network cables
Auto-MDIX feature ... B-6
required types ... 2-5
twisted pair, wiring rules ... B-6
twisted-pair connector pin-outs ... B-6
network devices
connecting to the switch ... 2-19
network ports
connecting to ... 2-19
location on switch ... 1-4
types of ... 1-4
non-standard network cables, effects ... 5-2
O
out-of-band
console connection required to configure IP
address ... 2-20, 3-1
direct connection through console port ... 2-21,
2-23
for switch management ... 3-1
networked connection through management
port ... 3-5
out-of-band console access ... 3-6
P
parts, included with the switch ... 2-1
password
configuring ... 3-3
passwords, deleting ... 1-12
Ping test ... 5-13
pin-outs
twisted-pair cables ... B-6
PoE LEDs ... 1-8
PoE/PoE+
operation ... 2-18
port configuration
checking when troubleshooting ... 5-3
Port LED View
indicator LEDs ... 1-11
Index – 3