HP 12500 SERIES Configuration Manual page 61

collision handling, 8
configuration, 13, 14, 38
configuration guidelines, 13
configuration restrictions, 13
configuring ARP MAD-enabled IRF fabric, 45
configuring BFD MAD-enabled IRF fabric, 42
configuring LACP MAD-enabled IRF fabric, 38
device member ID assignment, 16
device member priority, 16
displaying fabric, 37
domain ID, 6
domain ID assignment, 20
enabling auto reboot for IRF fabric merge, 25
enabling enhanced IRF mode (IRF mode), 24
enabling enhanced IRF mode (standalone
mode), 17
enabling IRF link auto-recovery, 28
enabling IRF link failure detection, 28
enhanced IRF mode configuration, 47
excluding port from shutdown action, 34
fabric size, 13
failure recovery, 9
fast-restoring IRF configuration for one-MPU
member, 36
feature and IRF mode compatibility, 13
hardware compatibility, 1
LACP MAD, 9
LACP MAD configuration, 29
link down report delay, 27
link redundancy, 13
MAD, 8
MAD configuration, 28
MAD configuration restrictions, 14
MAD detection, 8
MAD handling procedure, 8
master election, 7
member device description, 25
member ID, 5
member priority, 7
member roles, 4
merge, 7
MPU restrictions, 13
MPU roles, 5
network topologies, 2
operating mode, 4
overview, 1
physical port connection, 18
planning fabric setup, 15
port, 5
port restrictions, 13
recovering fabric, 35
restoring standalone mode, 52
saving configuration
configuration file, 18
setting operating mode to IRF mode, 19
software auto-update enable, 26
software requirements, 13
split, 7
IRF benefits, 1
IRF network topologies, 2
LACP MAD
IRF configuration, 29, 38
IRF dynamic link aggregation group, 9
link
enabling IRF link auto-recovery, 28
enabling IRF link failure detection, 28
IRF link down report delay, 27
IRF link redundancy, 13
recovering IRF fabric, 35
MAC address
IRF bridge MAC persistence, 25
MAD
3
to next-startup