HP 12500 SERIES Configuration Manual page 27

Step
2. Enter Ethernet interface
view or interface range
view.
3. Shut down the port or
ports.
4. Return to system view.
5. Enter IRF port view.
6. Bind each physical port to
the IRF port.
7. Return to system view.
8. Enter physical IRF port view
or interface range view.
9. Bring up the port or ports.
10. Return to system view.
Command
•
Enter interface range view:
Approach 1:
interface range
{ interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5>
Approach 2:
interface range name name
[ interface { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5> ]
•
Enter interface view:
interface interface-type
interface-number
shutdown
quit
irf-port member-id/port-number
port group [ mdc mdc-id ] interface
interface-type interface-number
quit
•
Enter interface range view:
Approach 1:
interface range
{ interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5>
Approach 2:
interface range name name
[ interface { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5> ]
• Enter interface view:
interface interface-type
interface-number
undo shutdown
quit
23
Remarks
To shut down a range of
physical IRF ports, enter
interface range view.
To shut down one physical IRF
port, enter its interface view.
By default, all ports are down.
N/A
N/A
By default, no physical ports
are bound to any IRF port.
Repeat this step to assign up to
12 physical ports to the IRF
port for link redundancy.
N/A
N/A
N/A
N/A